How To Root The Samsung Galaxy Tab 4 (SM-T240NU)

This guide will show you how to root the popular Samsung Galaxy Tab 4 device from Samsung.

Disclaimer: FlexiSPY is not responsible for rooting the Android device in any way.  Before performing any of these steps make sure you back up your Android device completely.

This is only for the device whose model number is SM-T230NU.

Rooting is done entirely by you at your own risk.

What is needed to root the Samsung Galaxy Tab 4?

In order to root the Samsung Galaxy Tab 4 you will need the following.

• The Samsung Galaxy Tab 4 you want to root in your hand.
• A PC.

Step 1 – Download the USB drivers for the Samsung Galaxy Tab 4 for your PC

In order for your PC to recognise the Samsung Galaxy Tab 4 as part of the rooting process you first must download and install the USB drivers on to your PC.

You can download the USB drivers for the Samsung Galaxy Tab 4 from here.

Once you have downloaded them run the main program file to make sure the drivers are installed.

Step 2 – Download the Odin rooting program

In order to root the Samsung Galaxy Tab 4 using the root file given in the next step you must first download Odin which is what will be used to install the root file on to the Samsung Galaxy Tab 4 and perform the rooting process.

You can download Odin from here.

Once downloaded extract the file to a convenient location such as the desktop.

Step 3 – Download the Samsung Galaxy Tab 4 root package

Now that we have installed the Samsung Galaxy Tab 4 USB drivers and downloaded Odin we now need to download the root package to be used for the rooting process.

You can download the Samsung Galaxy Tab 4 root package from here.

Make sure you save it in an easy to find location such as the desktop and extract it to its own folder.

This gives you a .TAR file.

Step 4 – Enable USB debugging on the Samsung Galaxy Tab 4

In order for your PC to recognise the Samsung Galaxy Tab 4 when you plug it in to perform rooting you must first enable USB debugging on the device itself.  This is done by doing the following.

1. Tap the Settings option.
2. Tap the About Device option.
3. Keep tapping the Build Number option (seven times) until it says you are a developer.
4. Tap the new Developer Options menu that appears.
5. Make sure that the USB Debugging option is checked.

Step 5 – Root the Samsung Galaxy Tab 4

Now that we have all we need it is time to root the Samsung Galaxy Tab 4.  Before we can do that you must first put the Samsung Galaxy Tab 4 in to Download mode which can be done using the following steps.

1. Make sure the Samsung Galaxy Tab 4 is powered off completely.
2. Hold down the Volume down key and the Home key and the power button and keep all three buttons pressed until the Samsung Galaxy Tab 4 powers up.
3. Providing you have done it correctly it should boot in to Download mode and you press the Volume up key to start Download mode.
4. Connect the Samsung Galaxy Tab 4 now to your PC.
5. Run the Odin software you downloaded in step 2.
6. Inside Odin click the AP/PDA option and browse on your computer to the .tar root file you extracted in step 4.
7. Inside Odin click Start to begin the root process.

The process will take a few moments after which the Samsung Galaxy Tab 4 will restart itself and complete the rooting process – Do not remove the Samsung Galaxy Tab 4 from your PC during this time.

Once the Samsung Galaxy Tab 4 starts up properly copy the zip file you downloaded in step 4 to the device in an easy to find location such as the Downloads folder.

Now that you have done that you must then reboot in to recovery mode.

• Make sure the device is turned off completely.
• Hold down Volume Up + Home + Power until the device turns on and boots in to recovery mode.

Now, with the device in recovery mode it will be the custom TWRP recovery you just installed.

The recovery will display a message asking if you want to root the device.

Slide to install SuperSU and root the device.

Once done return to the main menu and then reboot the device.

Once the device has rebooted normally you should see the SuperSU notification on the device.

Tap it to complete installing SuperSU and the device should be rooted.